Whether you’re a beginner or a seasoned user, mastering AutoCAD starts with knowing its commands. This comprehensive list covers every AutoCAD command, along with a clear description of its function, making it the ultimate reference to speed up your workflow, improve precision, and unlock the full potential of the software.
3D – A – B – C – D – E – F – G – H – I – J – K – L – M – N – O – P – Q – R – S – T – U – V – W – X – Y – Z
| Commande | Description |
|---|---|
| 3DALIGN | Aligns objects with other objects in 2D and 3D. |
| 3DARRAY | Creates nonassociative, 3D rectangular or polar arrays. |
| 3DCLIP | Opens the Adjust Clipping Planes window, where you can specify what portions of a 3D model to display. |
| 3DCORBIT | Rotates the view in 3D space with continuous motion. |
| 3DDISTANCE | Starts the interactive 3D view and makes objects appear closer or farther away. |
| 3DDWF | Creates a 3D DWF or 3D DWFx file of your 3D model and displays it in the DWF Viewer. |
| 3DEDITBAR | Reshapes splines and NURBS surfaces, including their tangency properties. |
| 3DFACE | Creates a three-sided or four-sided surface in 3D space. |
| 3DFLY | Changes the 3D view in a drawing interactively to create the appearance of flying through the model. |
| 3DFORBIT | Rotates the view in 3D space without constraining roll. |
| 3DMESH | Creates a free-form polygon mesh. |
| 3DMOVE | In a 3D view, displays the 3D Move gizmo to aid in moving 3D objects a specified distance in a specified direction. |
| 3DORBIT | Provides interactive viewing in 3D with the mouse. Right-click to display viewing options. |
| 3DORBITCTR | Sets a specific center of rotation in 3D Orbit view. |
| 3DOSNAP | Sets the object snap modes for 3D objects. |
| 3DPAN | Shifts the view without changing the viewing direction or magnification. |
| 3DPOLY | Creates a 3D polyline. |
| 3DPRINT | Specifies 3D Plot settings, and prepares your drawing for 3D printing. |
| 3DPRINTSERVICE | Creates an STL file that can be sent to a 3D printing service. |
| 3DROTATE | In a 3D view, displays the 3D Rotate gizmo to aid in revolving 3D objects around a base point. |
| 3DSCALE | In a 3D view, displays the 3D Scale gizmo to aid in resizing 3D objects. |
| 3DSIN | Imports a 3ds Max (3DS) file. |
| 3DSWIVEL | Changes the target of the view in the direction that you drag. |
| 3DWALK | Changes the 3D view in a drawing interactively to create the appearance of walking through the model. |
| 3DZOOM | Zooms in and out in a perspective view. |
A
| Commande | Description |
|---|---|
| ABOUT (Command) | Displays information about your product. |
| ACADINFO (Express Tool) | Creates a file that stores information about your AutoCAD installation and current setup. |
| ACISIN (Command) | Imports an ACIS (SAT) file and creates 3D solid, body, or region objects. |
| ACISOUT (Command) | Exports 3D solid, region, or body objects to an ACIS file. |
| ACTBASEPOINT (Command) | Inserts a base point or base point prompt in an action macro. |
| ACTIVITYINSIGHTSCLOSE (Command) | Closes the Activity Insights palette which displays activities for the current drawing. |
| ACTIVITYINSIGHTSOPEN (Command) | Opens the Activity Insights palette to view activities for the current drawing. |
| ACTMANAGER (Command) | Manages action macro files. |
| ACTRECORD (Command) | Starts the recording an action macro. |
| ACTSTOP (Command) | Stops the Action Recorder and provides the option of saving the recorded actions to an action macro file. |
| ACTUSERINPUT (Command) | Pauses for user input in an action macro. |
| ACTUSERMESSAGE (Command) | Inserts a user message into an action macro. |
| ADCCLOSE (Command) | Closes DesignCenter. |
| ADCENTER (Command) | Manages and inserts content such as blocks, xrefs, and hatch patterns. |
| ADCNAVIGATE (Command) | Loads a specified drawing file, folder, or network path in the DesignCenter Folders tab. |
| ADDSELECTED (Command) | Creates a new object of the same type and general properties as a selected object, but with different geometric values. |
| ADJUST (Command) | Adjusts the fade, contrast and monochrome settings of the selected underlay (DWF, DWFx, PDF, or DGN), or image. |
| ALIASEDIT (Express Tool) | Creates, modifies, and deletes AutoCAD command aliases. |
| ALIGN (Command) | Aligns objects with other objects in 2D and 3D. |
| ALIGNSPACE (Express Tool) | Adjusts the pan and zoom factor of a view in a layout viewport based on the alignment points specified in model space and paper space. |
| AMECONVERT (Command) | Converts AME solid models to AutoCAD solid objects. |
| ANALYSISCURVATURE (Command) | Displays a color gradient onto a surface to evaluate different aspects of its curvature. |
| ANALYSISDRAFT (Command) | Displays a color gradient onto a 3D model to evaluate whether there is adequate space between a part and its mold. |
| ANALYSISOPTIONS (Command) | Sets the display options for zebra, curvature, and draft analysis. |
| ANALYSISZEBRA (Command) | Projects stripes onto a 3D model to analyze surface continuity. |
| ANIPATH (Command) | Saves an animation of a camera moving or panning in a 3D model. |
| ANNORESET (Command) | Resets the locations of all alternate scale representations of the selected annotative objects. |
| ANNOUPDATE (Command) | Updates existing annotative objects to match the current properties of their styles. |
| APERTURE (Command) | Controls the size of the object snap target box. |
| APPAUTOLOADER (Command) | Lists or reloads all plug-ins in the application plug-in folder. |
| APPLOAD (Command) | Loads and unloads applications and defines which applications to load at startup. |
| APPSTORE (Command) | Opens the Autodesk App Store website. |
| ARC (Command) | Creates an arc. |
| ARCHIVE (Command) | Packages the current sheet set files for storage. |
| ARCTEXT (Express Tool) | Places text along an arc. |
| AREA (Command) | Calculates the area and perimeter of objects or of defined areas. |
| ARRAY (Command) | Creates copies of objects arranged in a pattern. |
| ARRAYCLASSIC (Command) | Creates arrays using the legacy dialog box. |
| ARRAYCLOSE (Command) | Saves or discards changes made to an array’s source objects and exits the array editing state. |
| ARRAYEDIT (Command) | Edits associative array objects and their source objects. |
| ARRAYPATH (Command) | Evenly distributes object copies along a path or a portion of a path. |
| ARRAYPOLAR (Command) | Evenly distributes object copies in a circular pattern around a center point or axis of rotation. |
| ARRAYRECT (Command) | Distributes object copies into any combination of rows, columns, and levels. |
| ARX (Command) | Loads, unloads, and provides information about ObjectARX applications. |
| ASSISTANTCLOSE (Command) | Closes the Autodesk Assistant palette which displays links to help related content from several sources along with an option to contact support. |
| ASSISTANTOPEN (Command) | Displays the Autodesk Assistant palette which displays links to help related content from several sources along with an option to contact support. |
| ATTACH (Command) | Inserts references to external files such as other drawings, raster images, point clouds, coordination models, and underlays. |
| ATTACHURL (Command) | Attaches hyperlinks to objects or areas in a drawing. |
| ATTDEF (Command) | Creates an attribute definition for storing data in a block. |
| ATTDISP (Command) | Controls the visibility overrides for all block attributes in a drawing. |
| ATTEDIT (Command) | Changes attribute information in a block. |
| ATTEXT (Command) | Extracts attribute data, informational text associated with a block, into a file. |
| ATTIN (Express Tool) | Imports block attribute values from an external, tab-delimited ASCII file. |
| ATTIPEDIT (Command) | Changes the textual content of an attribute within a block. |
| ATTOUT (Express Tool) | Exports block attribute values to an external file in tab-delimited ASCII format. |
| ATTREDEF (Command) | Redefines a block and updates associated attributes. |
| ATTSYNC (Command) | Applies attribute changes in a block definition to all block references. |
| AUDIT (Command) | Evaluates the integrity of a drawing and corrects some errors. |
| AUTOCONSTRAIN (Command) | Applies geometric constraints to a selection set of objects based on orientation of the objects relative to one another. |
| AUTOPUBLISH (Command) | Publishes drawings to DWF, DWFx, or PDF files automatically to a specified location. |
B
| Commande | Description |
|---|---|
| BACTION (Command) | Adds an action to a dynamic block definition. |
| BACTIONBAR (Command) | Displays or hides action bars for a selection set of parameter objects. |
| BACTIONSET (Command) | Specifies the selection set of objects associated with an action in a dynamic block definition. |
| BACTIONTOOL (Command) | Adds an action to a dynamic block definition. |
| BASE (Command) | Sets the insertion base point for the current drawing. |
| BASSOCIATE (Command) | Associates an action with a parameter in a dynamic block definition. |
| BATTMAN (Command) | Manages the attributes for a selected block definition. |
| BATTORDER (Command) | Specifies the order of attributes for a block. |
| BAUTHORPALETTE (Command) | Opens the Block Authoring Palettes window in the Block Editor. |
| BAUTHORPALETTECLOSE (Command) | Closes the Block Authoring Palettes window in the Block Editor. |
| BCLOSE (Command) | Closes the Block Editor. |
| BCONSTRUCTION (Command) | Converts block geometry into construction geometry, which may be hidden or displayed. |
| BCOUNT (Express Tool) | Creates a report of the number of instances of each block in a selection set or in the entire drawing. |
| BCPARAMETER (Command) | Applies constraint parameters to selected objects, or converts dimensional constraints to parameter constraints. |
| BCYCLEORDER (Command) | Changes the cycling order of grips for a dynamic block reference. |
| BDETECT (Command) | Displays the Detect palette where you can start object detection and manage the objects that are eligible for conversion. |
| BEDIT (Command) | Opens the block definition in the Block Editor. |
| BESETTINGS (Command) | Displays the Block Editor Settings dialog box. |
| BEXTEND (Express Tool) | Extends objects to blocks. |
| BGRIPSET (Command) | Creates, deletes, or resets grips associated with a parameter. |
| BLEND (Command) | Creates a spline in the gap between two selected lines or curves. |
| BLOCK (Command) | Creates a block definition from selected objects. |
| BLOCK? (Express Tool) | Lists the objects in a block definition. |
| BLOCKICON (Command) | Generates preview images for blocks displayed in DesignCenter. |
| BLOCKREPLACE (Express Tool) | Replaces all instances of a specified block with a different block. |
| BLOCKSDATAOPTION (Command) | Displays the data collection consent dialog box. |
| BLOCKSPALETTE (Command) | Displays the Blocks palette, which you can use to insert blocks and drawings into the current drawing. |
| BLOCKSPALETTECLOSE (Command) | Closes the Blocks palette. |
| BLOCKTOXREF (Express Tool) | Replaces all instances of a specified block with an xref. |
| BLOOKUPTABLE (Command) | Displays or creates a lookup table for a dynamic block definition. |
| BMPOUT (Command) | Saves selected objects to a file in device-independent bitmap format. |
| BOUNDARY (Command) | Creates regions or a polylines from enclosed areas. |
| BOX (Command) | Creates a 3D solid box. |
| BPARAMETER (Command) | Adds a parameter with grips to a dynamic block definition. |
| BREAK (Command) | Breaks the selected object between two points. |
| BREAKATPOINT (Command) | Breaks the selected object into two objects at a specified point. |
| BREAKLINE (Express Tool) | Creates a breakline, a polyline that includes the breakline symbol. |
| BREP (Command) | Removes the history from 3D solids and composite solids, and associativity from surfaces. |
| BREPLACE (Command) | Replaces specified block references with a different block. |
| BROWSER (Command) | Launches the default web browser defined in your system’s registry. |
| BSAVE (Command) | Saves the current block definition. |
| BSAVEAS (Command) | Saves a copy of the current block definition under a new name. |
| BSCALE (Express Tool) | Scales a block reference relative to its insertion point. |
| BSEARCH (Command) | Displays the Convert dialog box, which provides options to convert selected entities and identical instances into blocks. |
| BTABLE (Command) | Stores variations of a block in the Block Properties Table. |
| BTESTBLOCK (Command) | Displays a window within the Block Editor to test a dynamic block. |
| BTRIM (Express Tool) | Trim objects to blocks. |
| BURST (Express Tool) | Explodes selected blocks, preserving the block layer and converting attribute values to text objects. |
| BVHIDE (Command) | Makes objects invisible in the current visibility state or all visibility states in a dynamic block definition. |
| BVSHOW (Command) | Makes objects visible in the current visibility state or all visibility states in a dynamic block definition. |
| BVSTATE (Command) | Creates, sets, or deletes a visibility state in a dynamic block. |
C
| Commande | Description |
|---|---|
| CAL (Command) | Evaluates mathematical and geometric expressions at the Command prompt or within a command. |
| CAMERA (Command) | Sets a camera and target location to create and save a 3D perspective view of objects. |
| CDORDER (Express Tool) | Arranges the drawing order of selected objects by their color number. |
| CENTERDISASSOCIATE (Command) | Removes associativity of center marks or centerlines from objects they define. |
| CENTERLINE (Command) | Creates centerline geometry associated with selected lines and linear polyline segments. |
| CENTERMARK (Command) | Creates an associative, cross-shaped mark at the center of a selected circle or arc. |
| CENTERREASSOCIATE (Command) | Associates or reassociates a center mark or centerline object to selected objects. |
| CENTERRESET (Command) | Resets the centerlines to the current value specified in the CENTEREXE system variable. |
| CHAMFER (Command) | Bevels or chamfers the edges of two 2D objects or the adjacent faces of a 3D solid. |
| CHAMFEREDGE (Command) | Bevels the edges of 3D solids and surfaces. |
| CHANGE (Command) | Changes the properties of existing objects. |
| CHECKSTANDARDS (Command) | Checks the current drawing for standards violations. |
| CHPROP (Command) | Changes the properties of an object. |
| CHSPACE (Command) | On a layout, transfers selected objects between model space and paper space. |
| CHURLS (Express Tool) | Provides a method to edit a previously attached URL for selected objects. |
| CIRCLE (Command) | Creates a circle. |
| CLASSICGROUP (Command) | Opens the legacy Object Grouping dialog box. |
| CLASSICIMAGE (Command) | Manages referenced image files in the current drawing. |
| CLASSICINSERT (Command) | Inserts a block or drawing into the current drawing using the classic version of the INSERT command. |
| CLASSICLAYER (Command) | Opens the legacy Layer Properties Manager. |
| CLASSICXREF (Command) | Manages referenced drawing files in the current drawing. |
| CLEANSCREENOFF (Command) | Restores the state of the display before CLEANSCREENON was used. |
| CLEANSCREENON (Command) | Clears the screen of toolbars and dockable windows, excluding the command window. |
| CLIP (Command) | Crops selected objects such as blocks, external references, images, viewports, and underlays to a specified boundary. |
| CLIPIT (Express Tool) | Clips xrefs or images with lines and curves. |
| CLOSE (Command) | Closes the current drawing. |
| CLOSEALL (Command) | Closes all currently open drawings. |
| CLOSEALLOTHER (Command) | Closes all other open drawings, except the current drawing. |
| COLOR (Command) | Sets the color for new objects. |
| COMMANDLINE (Command) | Displays the Command window. |
| COMMANDLINEHIDE (Command) | Hides the Command window. |
| COMMANDMACROS (Command) | Opens the Command Macros palette from which you can manage and use command macro recommendations. |
| COMMANDMACROSCLOSE (Command) | Closes the Command Macros palette. |
| COMPARE (Command) | Compares a specified drawing file with the current drawing file, highlighting the differences with color within revision clouds. |
| COMPARECLOSE (Command) | Closes the DWG Compare toolbar and ends the comparison. |
| COMPAREEXPORT (Command) | Exports the results of the comparison into a new drawing file, called a snapshot drawing. |
| COMPAREIMPORT (Command) | Imports objects from the compared drawing into the current drawing. |
| COMPAREINFO (Command) | Provides a way to insert or copy the property information about the two compared drawing files. |
| COMPILE (Command) | Compiles shape files and PostScript font files into SHX files. |
| CONE (Command) | Creates a 3D solid cone. |
| CONSTRAINTBAR (Command) | Displays or hides the geometric constraints on an object. |
| CONSTRAINTSETTINGS (Command) | Controls the display of geometric constraints on constraint bars. |
| CONVERT (Command) | Converts “legacy” 2D polylines and hatches for use with later product releases. |
| CONVERTCTB (Command) | Converts a color-dependent plot style table (CTB) to a named plot style table (STB). |
| CONVERTOLDLIGHTS (Command) | Converts lights created in previous drawing file formats to the current format. |
| CONVERTOLDMATERIALS (Command) | Converts older materials to use the current materials format. |
| CONVERTPOLY (Command) | Converts 2D polylines between the “legacy” heavy and optimized lightweight formats. |
| CONVERTPSTYLES (Command) | Converts the current drawing to either named or color-dependent plot styles. |
| CONVTOMESH (Command) | Converts 3D objects such as polygon meshes, surfaces, and solids to mesh objects. |
| CONVTONURBS (Command) | Converts 3D solids and surfaces into NURBS surfaces. |
| CONVTOSOLID (Command) | Converts eligible 3D objects to 3D solids. |
| CONVTOSURFACE (Command) | Converts objects to 3D surfaces. |
| COORDINATIONMODELATTACH (Command) | Inserts references to coordination models such as NWD and NWC Navisworks files. |
| COPY (Command) | Copies objects a specified distance in a specified direction. |
| COPYBASE (Command) | Copies selected objects to the Clipboard along with a specified base point. |
| COPYCLIP (Command) | Copies selected objects to the Clipboard. |
| COPYFROMTRACE (Command) | Copies objects from a trace into the drawing. |
| COPYHIST (Command) | Copies the text in the command line history to the Clipboard. |
| COPYLINK (Command) | Copies the current view to the Clipboard for linking to other OLE applications. |
| COPYM (Express Tool) | Copies multiple objects with Repeat, Array, Divide and Measure options. |
| COPYTOLAYER (Command) | Copies one or more objects to another layer. |
| COUNT (Command) | Counts and highlights the instances of the selected object in the drawing. |
| COUNTAREA (Command) | Defines the area to count the instances of an object or block. |
| COUNTAREACLOSE (Command) | Cancels the count selection area. |
| COUNTCLOSE (Command) | Closes the Count toolbar and exits the count. |
| COUNTFIELD (Command) | Creates a field that’s set to the value of the current count. |
| COUNTLIST (Command) | Opens the Count palette to display and manage the counted blocks. |
| COUNTLISTCLOSE (Command) | Closes the Count palette. |
| COUNTNAVNEXT (Command) | Zooms to the next object in the count result. |
| COUNTNAVPREV (Command) | Zooms to the previous object in the count result. |
| COUNTTABLE (Command) | Inserts a table containing the block names and the corresponding count of each block in the drawing. |
| CUI (Command) | Manages the customized user interface elements in the product. |
| CUIEXPORT (Command) | Exports customized settings from the main CUIx file to an enterprise or partial CUIx file. |
| CUIIMPORT (Command) | Imports customized settings from an enterprise or partial CUIx file to the main CUIx file. |
| CUILOAD (Command) | Loads a customization file (CUIx). |
| CUIUNLOAD (Command) | Unloads a CUIx file. |
| CUSTOMIZE (Command) | Customizes tool palettes and tool palette groups. |
| CUTBASE (Command) | Copies selected objects to the Clipboard, along with a specified base point, and removes them from the drawing. |
| CUTCLIP (Command) | Copies selected objects to the Clipboard and removes them from the drawing. |
| CVADD (Command) | Adds control vertices to NURBS surfaces and splines. |
| CVHIDE (Command) | Turns off the display of control vertices for all NURBS surfaces and curves. |
| CVREBUILD (Command) | Rebuilds the shape of NURBS surfaces and curves. |
| CVREMOVE (Command) | Removes control vertices from NURBS surfaces and curves. |
| CVSHOW (Command) | Displays the control vertices for specified NURBS surfaces or curves. |
| CYLINDER (Command) | Creates a 3D solid cylinder. |
D
| Commande | Description |
|---|---|
| DATAEXTRACTION (Command) | Extracts drawing data and merges data from an external source to a data extraction table or external file. |
| DATALINK (Command) | Displays the Data Link dialog box. |
| DATALINKUPDATE (Command) | Updates data to or from an established external data link. |
| DBCCLOSE (Command) | Closes the Select Data Object dialog box (dbConnect Manager). |
| DBCCONFIGURE (Command) | Opens the Configure a Data Source dialog box (dbConnect Manager). |
| DBCDEFINELLT (Command) | Opens the Select a Database Object dialog box. |
| DBCDEFINELT (Command) | Opens the Select Data Object Dialog Box (dbConnect Manager). |
| DBCONNECT (Command) | Provides an interface to external database tables. |
| DBLIST (Command) | Lists database information for each object in the drawing. |
| DCALIGNED (Command) | Constrains the distance between two points on different objects. |
| DCANGULAR (Command) | Constrains the angle between line or polyline segments, the angle swept out by an arc or a polyline arc segment, or the angle between three points on objects. |
| DCCONVERT (Command) | Converts associative dimensions to dimensional constraints. |
| DCDIAMETER (Command) | Constrains the diameter of a circle or an arc. |
| DCDISPLAY (Command) | Displays or hides the dynamic constraints associated with a selection set of objects. |
| DCFORM (Command) | Specifies whether the dimensional constraint being created is dynamic or annotational. |
| DCHORIZONTAL (Command) | Constrains the X distance between points on an object, or between two points on different objects. |
| DCLINEAR (Command) | Creates a horizontal, vertical, or rotated constraint based on the locations of the extension line origins and the dimension line. |
| DCRADIUS (Command) | Constrains the radius of a circle or an arc. |
| DCVERTICAL (Command) | Constrains the Y distance between points on an object, or between two points on different objects. |
| DELAY (Command) | Provides a timed pause within a script. |
| DELCONSTRAINT (Command) | Removes all geometric and dimensional constraints from a selection set of objects. |
| DETACHURL (Command) | Removes hyperlinks in a drawing. |
| DETECTCLOSE (Command) | Ends the detection review. |
| DETECTCONVERT (Command) | Displays the Convert dialog box, which provides options to convert the detected objects and instances into blocks. |
| DETECTPRIMARY (Command) | Specifies the detected instance from which a new block definition is created. |
| DETECTREMOVE (Command) | Removes selected instances from the set. |
| DETECTREVIEWNEXT (Command) | Displays the next set of detected objects. |
| DETECTREVIEWPREV (Command) | Displays the previous set of detected objects. |
| DGNADJUST (Command) | Adjusts the fade, contrast, and monochrome settings of a DGN underlay. |
| DGNATTACH (Command) | Inserts a DGN file as an underlay into the current drawing. |
| DGNCLIP (Command) | Crops the display of a selected DGN underlay to a specified boundary. |
| DGNEXPORT (Command) | Creates one or more DGN files from the current drawing. |
| DGNIMPORT (Command) | Imports the data from a DGN file into a new DWG file or the current DWG file. |
| DGNLAYERS (Command) | Controls the display of layers in a DGN underlay. |
| DGNMAPPING (Command) | Allows users to create and edit user-defined DGN mapping setups. |
| DIGITALSIGN (Command) | Attaches a digital signature to a drawing, which is removed if an unauthorized change is made. |
| DIM (Command) | Creates multiple dimensions and types of dimensions with a single command. |
| DIMALIGNED (Command) | Creates an aligned linear dimension. |
| DIMANGULAR (Command) | Creates an angular dimension. |
| DIMARC (Command) | Creates an arc length dimension. |
| DIMBASELINE (Command) | Creates a dimension from the baseline of the previous or selected dimension. |
| DIMBREAK (Command) | Breaks or restores dimension and extension lines where they cross other objects. |
| DIMCENTER (Command) | Creates the non-associative center mark or centerlines of circles and arcs. |
| DIMCONSTRAINT (Command) | Applies dimensional constraints or converts associative dimensions to constraints. |
| DIMCONTINUE (Command) | Creates a dimension starting from an extension line of the previous dimension. |
| DIMDIAMETER (Command) | Creates a diameter dimension for a circle or an arc. |
| DIMDISASSOCIATE (Command) | Removes associativity from selected dimensions. |
| DIMEDIT (Command) | Edits dimension text and extension lines. |
| DIMEX (Express Tool) | Exports named dimension styles and their settings to an external file. |
| DIMIM (Express Tool) | Imports named dimension styles and their settings from an external file. |
| DIMINSPECT (Command) | Adds or removes inspection information for a dimension. |
| DIMJOGGED (Command) | Creates jogged dimensions for circles and arcs. |
| DIMJOGLINE (Command) | Adds or removes a jog line on a dimension. |
| DIMLINEAR (Command) | Creates a linear dimension. |
| DIMORDINATE (Command) | Creates ordinate dimensions. |
| DIMOVERRIDE (Command) | Controls overrides of system variables used in selected dimensions. |
| DIMRADIUS (Command) | Creates a radius dimension for a circle or arc. |
| DIMREASSOC (Express Tool) | Restores the measured value to modified dimension text. |
| DIMREASSOCIATE (Command) | Reassociates dimensions to objects or points. |
| DIMREGEN (Command) | Updates the locations of all associative dimensions. |
| DIMROTATED (Command) | Creates a rotated linear dimension. |
| DIMSPACE (Command) | Adjusts spacing between dimensions. |
| DIMSTYLE (Command) | Creates and modifies dimension styles. |
| DIMTEDIT (Command) | Moves or rotates dimension text and relocates the dimension line. |
| DIST (Command) | Measures the distance and angle between two points. |
| DISTANTLIGHT (Command) | Creates a distant light. |
| DIVIDE (Command) | Creates evenly spaced point objects or blocks along an object. |
| DONUT (Command) | Creates a filled circle or ring. |
| DOWNLOADMANAGER (Command) | Reports the status of the current download. |
| DRAGMODE (Command) | Controls how dragged objects are displayed. |
| DRAWINGRECOVERY (Command) | Displays a list of recoverable drawing files. |
| DRAWINGRECOVERYHIDE (Command) | Closes the Drawing Recovery Manager. |
| DRAWORDER (Command) | Changes the draw order of objects. |
| DSETTINGS (Command) | Sets grid, snap, object snaps, and other drafting settings. |
| DVIEW (Command) | Defines parallel or perspective views using a camera. |
| DWFADJUST (Command) | Adjusts the fade, contrast, and monochrome settings of a DWF/DWFx underlay. |
| DWFATTACH (Command) | Inserts a DWF or DWFx file as an underlay. |
| DWFCLIP (Command) | Crops a DWF/DWFx underlay display. |
| DWFFORMAT (Command) | Sets the default DWF/DWFx output format. |
| DWFLAYERS (Command) | Controls the display of DWF/DWFx layers. |
| DWGCONVERT (Command) | Converts drawing file format version. |
| DWGLOG (Express Tool) | Creates and maintains a log file for each drawing. |
| DWGPROPS (Command) | Sets and displays drawing file properties. |
| DXBIN (Command) | Imports an AutoCAD DXB file. |
E
| Commande | Description |
|---|---|
| EATTEDIT (Command) | Edits attributes in a block reference. |
| EATTEXT (Command) | Exports block attribute information to a table or to an external file. |
| EDGE (Command) | Changes the visibility of 3D face edges. |
| EDGESURF (Command) | Creates a mesh between four contiguous edges or curves. |
| EDITSHOT (Command) | Edits a saved named view with or without motion. |
| EDITTIME (Express Tool) | Tracks the amount of active editing time for a drawing. |
| ELEV (Command) | Sets elevation and extrusion thickness of new objects. |
| ELLIPSE (Command) | Creates an ellipse or an elliptical arc. |
| ERASE (Command) | Removes objects from a drawing. |
| ETRANSMIT (Command) | Packages a set of files for Internet transmission. |
| EXOFFSET (Express Tool) | Offsets selected objects. |
| EXPLAN (Express Tool) | Displays an orthographic view of the XY plane of a specified UCS without changing the view magnification. |
| EXPLODE (Command) | Breaks a compound object into its component objects. |
| EXPORT (Command) | Saves the objects in a drawing to a different file format. |
| EXPORTDWF (Command) | Creates a DWF file and allows you to set individual page setup overrides on a sheet-by-sheet basis. |
| EXPORTDWFX (Command) | Creates a DWFx file where you can set individual page setup overrides on a sheet-by-sheet basis. |
| EXPORTLAYOUT (Command) | Creates a visual representation of the current layout in the model space of a new drawing. |
| EXPORTPDF (Command) | Generates a PDF file from a single layout, all layouts, or a specified area in model space. |
| EXPORTSETTINGS (Command) | Adjusts the page setup and drawing selection when exporting to a DWF, DWFx, or PDF file. |
| EXPORTTOAUTOCAD (Command) | Creates a version of a drawing file that can be opened in products such as AutoCAD and previous releases of a toolset. |
| EXPRESSMENU (Express Tool) | Loads the AutoCAD Express Tools menu and displays the Express menu on the menu bar. |
| EXPRESSTOOLS (Express Tool) | Loads the AutoCAD Express Tools libraries, places the Express folder in the search path, and loads and places the Express menu on the menu bar. |
| EXTEND (Command) | Extends objects to meet the edges of other objects. |
| EXTERNALREFERENCES (Command) | Opens the External References palette. |
| EXTERNALREFERENCESCLOSE (Command) | Closes the External References palette. |
| EXTRIM (Express Tool) | Trims all objects at the cutting edge specified by a selected polyline, line, circle, arc, ellipse, text, mtext, or attribute definition. |
| EXTRUDE (Command) | Creates a 3D solid from an object that encloses an area, or a 3D surface from an object with open ends. |
F
| Commande | Description |
|---|---|
| FADEMARKUP (Command) | Fade individual markups so they are less visible on a trace. |
| FIELD (Command) | Creates a multiline text object with a field that can be updated automatically as the field value changes. |
| FILETAB (Command) | Displays the file tabs at the top of the drawing area. |
| FILETABCLOSE (Command) | Hides the file tabs at the top of the drawing area. |
| FILL (Command) | Controls the display of filled objects such as hatches, 2D solids, and wide polylines. |
| FILLET (Command) | Rounds or fillets the edges of two 2D objects or the adjacent faces of a 3D solid. |
| FILLETEDGE (Command) | Rounds and fillets the edges of solid objects. |
| FILTER (Command) | Creates a list of requirements that an object must meet to be included in a selection set. |
| FIND (Command) | Finds the text that you specify, and can optionally replace it with other text. |
| FLATSHOT (Command) | Creates a 2D representation of all 3D objects based on the current view. |
| FLATTEN (Express Tool) | Converts 3D geometry to a projected 2D representation. |
| FREESPOT (Command) | Creates a free spotlight which is a spotlight without a specified target. |
| FREEWEB (Command) | Creates a free web light which is a web light without a specified target. |
| FS (Express Tool) | Creates a selection set of all objects that touch the selected object. |
G
| Commande | Description |
|---|---|
| GATTE (Express Tool) | Globally changes attribute values for all instances of a specified block. |
| GCCOINCIDENT (Command) | Constrains two points together or a point to a curve (or an extension of a curve). |
| GCCOLLINEAR (Command) | Causes two or more line segments to lie along the same line. |
| GCCONCENTRIC (Command) | Constrains two arcs, circles, or ellipses to the same center point. |
| GCEQUAL (Command) | Resizes selected arcs and circles to the same radius, or selected lines to the same length. |
| GCFIX (Command) | Locks points and curves in position. |
| GCHORIZONTAL (Command) | Causes lines or pairs of points to lie parallel to the X axis of the current coordinate system. |
| GCPARALLEL (Command) | Causes selected lines to lie parallel to each other. |
| GCPERPENDICULAR (Command) | Causes selected lines to lie 90 degrees to one another. |
| GCSMOOTH (Command) | Constrains a spline to be contiguous and maintain G2 continuity with another spline, line, arc, or polyline. |
| GCSYMMETRIC (Command) | Causes selected objects to become symmetrically constrained about a selected line. |
| GCTANGENT (Command) | Constrains two curves to maintain a point of tangency to each other or their extensions. |
| GCVERTICAL (Command) | Causes lines or pairs of points to lie parallel to the Y axis of the current coordinate system. |
| GEOGRAPHICLOCATION (Command) | Assigns geographic location information to a drawing file. |
| GEOMAP (Command) | Displays a map from an online maps service, in the current viewport. |
| GEOMAPIMAGE (Command) | Captures a portion of the online map to an object known as a map image, and embeds it in the drawing area. |
| GEOMAPIMAGEUPDATE (Command) | Updates map images from the online maps service and optionally resets their resolution for optimal on-screen viewing. |
| GEOMARKLATLONG (Command) | Places a position marker at a location defined by latitude and longitude. |
| GEOMARKME (Command) | Places a position marker in the drawing area at the coordinates corresponding to your current position. |
| GEOMARKPOINT (Command) | Places a position marker at a specified point in model space. |
| GEOMARKPOSITION (Command) | Places a position marker at a location you specify. |
| GEOMCONSTRAINT (Command) | Applies or persists geometric relationships between objects or points on objects. |
| GEOREMOVE (Command) | Removes all geographic location information from the drawing file. |
| GEOREORIENTMARKER (Command) | Changes the north direction and position of the geographic marker in model space, without changing its latitude and longitude. |
| GETSEL (Express Tool) | Creates a selection set of objects based on layer and object type filters. |
| GOTOSTART (Command) | Switches from the current drawing to the Start tab. |
| GOTOURL (Command) | Opens the file or web page associated with the hyperlink attached to an object. |
| GRADIENT (Command) | Fills an enclosed area or selected objects with a gradient fill. |
| GRAPHICSCONFIG (Command) | Sets hardware acceleration on or off and provides access to display performance options. |
| GRAPHSCR (Command) | Causes the text window to display behind the application window. |
| GRID (Command) | Displays a grid pattern in the current viewport. |
| GROUP (Command) | Creates and manages saved sets of objects called groups. |
| GROUPEDIT (Command) | Adds and removes objects from the selected group, or renames a selected group. |
H
| Commande | Description |
|---|---|
| HATCH (Command) | Fills an enclosed area or selected objects with a hatch pattern, solid fill, or gradient fill. |
| HATCHEDIT (Command) | Modifies an existing hatch or fill. |
| HATCHGENERATEBOUNDARY (Command) | Creates a non-associated polyline around a selected hatch. |
| HATCHSETBOUNDARY (Command) | Redefines a selected hatch or fill to conform to a different closed boundary. |
| HATCHSETORIGIN (Command) | Controls the starting location of hatch pattern generation for a selected hatch. |
| HATCHTOBACK (Command) | Sets the draw order for all hatches in the drawing to be behind all other objects. |
| HELIX (Command) | Creates a 2D spiral or 3D spring. |
| HELP (Command) | Displays the online or offline Help system. |
| HIDE (Command) | Displays a 3D model with hidden lines suppressed for the 2D Wireframe visual style. |
| HIDEOBJECTS (Command) | Temporarily suppresses the display of selected objects. |
| HIDEPALETTES (Command) | Hides all displayed palettes, along with the ribbon and the drawing tabs. |
| HIGHLIGHTNEW (Command) | Controls whether new and changed features in product updates are highlighted in the user interface with an orange dot. |
| HLSETTINGS (Command) | Sets the display of such properties as hidden lines. |
| HYPERLINK (Command) | Attaches a hyperlink to an object or modifies an existing hyperlink. |
| HYPERLINKOPTIONS (Command) | Controls the display of the hyperlink cursor, tooltips, and shortcut menu. |
I
| Commande | Description |
|---|---|
| ID (Command) | Displays the UCS coordinate values of a specified location. |
| IGESEXPORT (Command) | Saves selected objects in the current drawing to a new IGES (*.igs, *.iges) file. |
| IGESIMPORT (Command) | Imports data from an IGES (*.igs or *.iges) file into the current drawing. |
| IMAGE (Command) | Displays the External References palette. |
| IMAGEADJUST (Command) | Controls the brightness, contrast, and fade values of images. |
| IMAGEAPP (Express Tool) | Specifies the image editing program for IMAGEEDIT. |
| IMAGEASYNCWAIT (Command) | Ensures that raster images being loaded in the background during file opening are complete before proceeding. |
| IMAGEATTACH (Command) | Inserts a reference to an image file. |
| IMAGECLIP (Command) | Crops the display of a selected image to a specified boundary. |
| IMAGEEDIT (Express Tool) | Launches the image editing program specified by IMAGEAPP for the selected image. |
| IMAGEQUALITY (Command) | Controls the display quality of images. |
| IMPORT (Command) | Imports files of different formats into the current drawing. |
| IMPRINT (Command) | Imprints 2D geometry on a 3D solid or surface, creating additional edges on planar faces. |
| INPUTSEARCHOPTIONS (Command) | Opens a dialog box that controls settings for display of the command line suggestion list for commands, system variables, and named objects. |
| INSERT (Command) | Displays the Blocks palette, which you can use to insert blocks and drawings into the current drawing. |
| INSERTOBJ (Command) | Inserts a linked or embedded object. |
| INTERFERE (Command) | Creates a temporary 3D solid from the interferences between two sets of selected 3D solids. |
| INTERSECT (Command) | Creates a 3D solid, surface, or 2D region from overlapping solids, surfaces, or regions. |
| ISODRAFT (Command) | Turns isometric drafting settings on or off, and specifies the current 2D isometric drafting plane. |
| ISOLATEOBJECTS (Command) | Temporarily suppresses the display of all objects except those you select. |
| ISOPLANE (Command) | Specifies the current plane for 2D isometric drawing. |
J
| Commande | Description |
|---|---|
| JOIN (Command) | Joins the endpoints of linear and curved objects to create a single object. |
| JPGOUT (Command) | Saves selected objects to a file in JPEG file format. |
| JULIAN (Express Tool) | Contains the DATE tool and several AutoCAD Julian date and calendar date conversion routines. |
| JUSTIFYTEXT (Command) | Changes the justification point of selected text objects without changing their locations. |
K
L
| Commande | Description |
|---|---|
| LAYCUR (Command) | Changes the layer property of selected objects to the current layer. |
| LAYDEL (Command) | Deletes all objects on a layer and purges the layer. |
| LAYER (Command) | Manages layers and layer properties. |
| LAYERCLOSE (Command) | Closes the Layer Properties Manager. |
| LAYERP (Command) | Undoes the last change or set of changes made to layer settings. |
| LAYERPALETTE (Command) | Opens the modeless Layer Properties Manager. |
| LAYERPMODE (Command) | Turns on and off the tracking of changes made to layer settings for use by the LAYERP command. |
| LAYERSTATE (Command) | Saves, restores, and manages sets of layer settings that are called layer states. |
| LAYERSTATESAVE (Command) | Displays the New Layer State to Save dialog box, where you can provide a name and a description for a new layer state. |
| LAYFRZ (Command) | Freezes the layer of selected objects. |
| LAYISO (Command) | Hides or locks all layers except those of the selected objects. |
| LAYLCK (Command) | Locks the layer of a selected object. |
| LAYMCH (Command) | Changes the layer of a selected object to match the destination layer. |
| LAYMCUR (Command) | Sets the current layer to that of a selected object. |
| LAYMRG (Command) | Merges selected layers into a target layer, removing them from the drawing. |
| LAYOFF (Command) | Turns off the layer of a selected object. |
| LAYON (Command) | Turns on all layers in the drawing. |
| LAYOUT (Command) | Creates and modifies drawing layouts. |
| LAYOUTMERGE (Express Tool) | Combines specified layouts into a single layout. |
| LAYOUTWIZARD (Command) | Creates a new layout tab and specifies page and plot settings. |
| LAYTHW (Command) | Thaws all layers in the drawing. |
| LAYTRANS (Command) | Translates the layers in the current drawing to specified layer standards. |
| LAYULK (Command) | Unlocks the layer of a selected object. |
| LAYUNISO (Command) | Restores all layers that were hidden or locked with the LAYISO command. |
| LAYVPI (Command) | Freezes selected layers in all layout viewports except the current viewport. |
| LAYWALK (Command) | Displays objects on selected layers and hides objects on all other layers. |
| LEADER (Command) | Creates a line that connects annotation to a feature. |
| LENGTHEN (Command) | Changes the length of objects and the included angle of arcs. |
| LIGHT (Command) | Creates a light. |
| LIGHTLIST (Command) | Displays the Lights in Model palette that lists all lights in the model. |
| LIGHTLISTCLOSE (Command) | Closes the Lights in Model palette. |
| LIMITS (Command) | Sets an invisible rectangular boundary in the drawing area that can limit the grid display and limit clicking or entering point locations. |
| LINE (Command) | Creates a series of contiguous line segments. Each segment is a line object that can be edited separately. |
| LINETYPE (Command) | Loads, sets, and modifies linetypes. |
| LIST (Command) | Displays property data for selected objects. |
| LIVESECTION (Command) | Turns on live sectioning for a selected section object. |
| LOAD (Command) | Makes the symbols in compiled shape (SHX) files available for use by the SHAPE command. |
| LOFT (Command) | Creates a 3D solid or surface in the space between several cross sections. |
| LOGFILEOFF (Command) | Closes the command history log file opened by LOGFILEON. |
| LOGFILEON (Command) | Writes the contents of the command history to a file. |
| LSP (Express Tool) | Displays a list of all available AutoLISP commands, functions, and variables. |
| LSPSURF (Express Tool) | Displays the contents of an AutoLISP file by individual functions. |
| LTSCALE (Command) | Sets the global linetype scale factor. |
| LWEIGHT (Command) | Sets the current lineweight, lineweight display options, and lineweight units. |
M
| Commande | Description |
|---|---|
| MAKELISPAPP (Command) | Compiles one or more AutoLISP (LSP) source files into a VLX application file. |
| MARKUP (Command) | Opens the Markup Set Manager. |
| MARKUPASSIST (Command) | Analyzes an imported markup to assist with placing callouts and revision clouds. |
| MARKUPCLOSE (Command) | Closes the Markup Set Manager. |
| MARKUPIMPORT (Command) | Imports a marked-up drawing (image/PDF) into the DWG as a new trace. |
| MASSPROP (Command) | Calculates the mass properties of selected 2D regions or 3D solids. |
| MATBROWSERCLOSE (Command) | Closes the Materials Browser. |
| MATBROWSEROPEN (Command) | Opens the Materials Browser. |
| MATCHCELL (Command) | Applies the properties of a selected table cell to other cells. |
| MATCHPROP (Command) | Applies the properties of a selected object to other objects. |
| MATEDITORCLOSE (Command) | Closes the Materials Editor. |
| MATEDITOROPEN (Command) | Opens the Materials Editor. |
| MATERIALASSIGN (Command) | Assigns the current material to selected objects. |
| MATERIALATTACH (Command) | Associates materials with layers. |
| MATERIALMAP (Command) | Adjusts texture mapping on a face or object. |
| MATERIALS (Command) | Opens the Materials Browser. |
| MATERIALSCLOSE (Command) | Closes the Materials Browser. |
| MEASURE (Command) | Creates point objects or blocks at measured intervals along an object. |
| MEASUREGEOM (Command) | Measures distance, radius, angle, area, and volume. |
| MENU (Command) | Obsolete. Loads a customization file. |
| MESH (Command) | Creates a 3D mesh primitive object. |
| MESHCAP (Command) | Creates a mesh face that connects open edges. |
| MESHCOLLAPSE (Command) | Merges the vertices of selected mesh faces or edges. |
| MESHCREASE (Command) | Sharpens the edges of selected mesh subobjects. |
| MESHEXTRUDE (Command) | Extends a mesh face into 3D space. |
| MESHMERGE (Command) | Merges adjacent faces into a single face. |
| MESHOPTIONS (Command) | Sets default settings for converting objects to mesh. |
| MESHPRIMITIVEOPTIONS (Command) | Sets tessellation defaults for mesh primitives. |
| MESHREFINE (Command) | Increases the number of mesh faces. |
| MESHSMOOTH (Command) | Converts 3D objects to mesh objects. |
| MESHSMOOTHLESS (Command) | Decreases the mesh smoothness level. |
| MESHSMOOTHMORE (Command) | Increases the mesh smoothness level. |
| MESHSPIN (Command) | Spins the adjoining edge of two triangular mesh faces. |
| MESHSPLIT (Command) | Splits a mesh face into two faces. |
| MESHUNCREASE (Command) | Removes creases from mesh faces, edges, or vertices. |
| MIGRATEMATERIALS (Command) | Converts legacy materials to generic types. |
| MINSERT (Command) | Inserts multiple block instances in a rectangular array. |
| MIRROR (Command) | Creates a mirrored copy of selected objects. |
| MIRROR3D (Command) | Mirrors 3D objects across a mirroring plane. |
| MKLTYPE (Express Tool) | Creates a linetype definition from selected objects. |
| MKSHAPE (Express Tool) | Creates a shape definition from selected objects. |
| MLEADER (Command) | Creates a multileader object. |
| MLEADERALIGN (Command) | Aligns and spaces multileader objects. |
| MLEADERCOLLECT (Command) | Groups multileaders with blocks into rows or columns. |
| MLEADEREDIT (Command) | Adds or removes leader lines to/from a multileader. |
| MLEADERSTYLE (Command) | Creates and modifies multileader styles. |
| MLEDIT (Command) | Edits multiline intersections, breaks, and vertices. |
| MLINE (Command) | Creates multiple parallel lines. |
| MLSTYLE (Command) | Manages multiline styles. |
| MOCORO (Express Tool) | Moves, copies, rotates, and scales objects in one command. |
| MODEL (Command) | Switches to the Model tab from a layout. |
| MOVE (Command) | Moves objects a specified distance and direction. |
| MOVEBAK (Express Tool) | Changes the folder location for backup (BAK) files. |
| MPEDIT (Express Tool) | Edits multiple polylines or converts lines/arcs to polylines. |
| MREDO (Command) | Reapplies previously undone actions. |
| MSLIDE (Command) | Creates a slide file of the current view. |
| MSPACE (Command) | Switches to model space within a layout viewport. |
| MSTRETCH (Express Tool) | Stretches objects using multiple crossing windows or polygons. |
| MTEDIT (Command) | Edits multiline text. |
| MTEXT (Command) | Creates a multiline text object. |
| MULTIPLE (Command) | Repeats the next command until canceled. |
| MVIEW (Command) | Creates and controls layout viewports. |
| MVSETUP (Command) | Sets up drawing specifications. |
N
| Commande | Description |
|---|---|
| NAVBAR (Command) | Provides access to viewing tools from a unified interface. |
| NAVSMOTION (Command) | Provides an on-screen display for creating and playing back cinematic camera animations for design review, presentation, and bookmark-style navigation. |
| NAVSMOTIONCLOSE (Command) | Closes the ShowMotion interface where you can navigate within a drawing by selecting a named view. |
| NAVSWHEEL (Command) | Provides access to enhanced navigation tools that are quickly accessible from the cursor. |
| NAVVCUBE (Command) | Indicates the current viewing direction. Dragging or clicking the ViewCube rotates the scene. |
| NCOPY (Command) | Copies objects that are contained in an xref, block, or DGN underlay. |
| NETLOAD (Command) | Loads a .NET application. |
| NEW (Command) | Starts a new drawing. |
| NEWSHEETSET (Command) | Creates a new sheet set data file that manages drawing layouts, file paths, and project data. |
| NEWSHOT (Command) | Creates a named view with motion that is played back when viewed with ShowMotion. |
| NEWVIEW (Command) | Saves a new, named view from the display in the current viewport, or by defining a rectangular window. |
O
| Commande | Description |
|---|---|
| OBJECTSCALE (Command) | Adds or deletes supported scales for annotative objects. |
| OFFSET (Command) | Creates concentric circles, parallel lines, and parallel curves. |
| OFFSETEDGE (Command) | Creates a closed polyline or spline offset from edges of a planar face on a 3D solid or surface. |
| OLECONVERT (Command) | Specifies a different source application for an embedded OLE object and controls its representation. |
| OLELINKS (Command) | Updates, changes, or cancels a selected linked OLE object. |
| OLEOPEN (Command) | Opens the selected OLE object in its source application. |
| OLERESET (Command) | Restores the selected OLE object to its original size and shape. |
| OLESCALE (Command) | Controls the size, scale, and properties of a selected OLE object. |
| OOPS (Command) | Restores the most recently erased objects. |
| OPEN (Command) | Opens an existing drawing file. |
| OPENDWFMARKUP (Command) | Opens a DWF or DWFx file that contains markups. |
| OPENFROMWEBMOBILE (Command) | Opens a drawing file from your Autodesk Account online. |
| OPENSHEETSET (Command) | Opens a selected sheet set. |
| OPTIONS (Command) | Customizes the program settings. |
| ORTHO (Command) | Constrains cursor movement to horizontal or vertical directions. |
| OSNAP (Command) | Sets running object snap modes. |
| OVERKILL (Command) | Removes duplicate or overlapping lines, arcs, and polylines, and merges partial overlaps. |
P
| Commande | Description |
|---|---|
| PAGESETUP (Command) | Controls the page layout, plotting device, paper size, and other settings for each new layout. |
| PAN (Command) | Shifts the view without changing the viewing direction or magnification. |
| PARAMETERS (Command) | Opens the Parameters Manager palette with all constraint parameters and user variables. |
| PARAMETERSCLOSE (Command) | Closes the Parameters Manager palette. |
| PARTIALOAD (Command) | Loads additional geometry into a partially opened drawing. |
| PARTIALOPEN (Command) | Loads geometry and named objects from a selected view or layer into a drawing. |
| PASTEASHYPERLINK (Command) | Creates a hyperlink to a file and associates it with a selected object. |
| PASTEBLOCK (Command) | Pastes objects from the Clipboard into the current drawing as a block. |
| PASTECLIP (Command) | Pastes objects from the Clipboard into the current drawing. |
| PASTEORIG (Command) | Pastes objects from the Clipboard using original coordinates. |
| PASTESPEC (Command) | Pastes objects from the Clipboard and controls the data format. |
| PCEXTRACTCENTERLINE (Command) | Creates a center line from a cylindrical segment in a point cloud. |
| PCEXTRACTCORNER (Command) | Creates a point at the intersection of three planes in a point cloud. |
| PCEXTRACTEDGE (Command) | Creates a line along the edge of intersecting planar segments in a point cloud. |
| PCEXTRACTSECTION (Command) | Generates 2D geometry from a section through a point cloud. |
| PDFADJUST (Command) | Adjusts fade, contrast, and monochrome of a PDF underlay. |
| PDFATTACH (Command) | Inserts a PDF file as an underlay into the current drawing. |
| PDFCLIP (Command) | Crops the display of a selected PDF underlay. |
| PDFIMPORT (Command) | Imports geometry, fills, images, and text from a PDF file. |
| PDFLAYERS (Command) | Controls the display of layers in a PDF underlay. |
| PDFSHXTEXT (Command) | Converts SHX geometry from PDFs into multiline text. |
| PEDIT (Command) | Edits polylines and related objects. |
| PERFANALYZER (Command) | Opens the Performance Analyzer to diagnose AutoCAD slowness. |
| PERFANALYZERCLOSE (Command) | Closes the Performance Analyzer palette. |
| PFACE (Command) | Creates a 3D polyface mesh, vertex by vertex. |
| PLAN (Command) | Displays an orthographic view of the XY plane of a UCS. |
| PLANESURF (Command) | Creates a planar surface. |
| PLINE (Command) | Creates a 2D polyline composed of lines and arcs. |
| PLOT (Command) | Plots a drawing to a device or file. |
| PLOTSTAMP (Command) | Places plot info (date, time, etc.) in a corner of each plotted drawing. |
| PLOTSTYLE (Command) | Controls named plot styles for the current layout. |
| PLOTTERMANAGER (Command) | Opens Plotter Manager to edit plotter configurations. |
| PLT2DWG (Express Tool) | Imports legacy HPGL files and retains colors. |
| PMTOGGLE (Command) | Turns Performance Recorder on or off. |
| PNGOUT (Command) | Saves selected objects to a PNG file. |
| POINT (Command) | Creates a point object. |
| POINTCLOUDATTACH (Command) | Inserts a point cloud (RCS/RCP) into the drawing. |
| POINTCLOUDCOLORMAP (Command) | Opens Point Cloud Color Map settings. |
| POINTCLOUDCROP (Command) | Crops a point cloud to a defined boundary. |
| POINTCLOUDCROPSTATE (Command) | Saves, restores, or deletes point cloud crop states. |
| POINTCLOUDMANAGER (Command) | Opens the Point Cloud Manager palette. |
| POINTCLOUDMANAGERCLOSE (Command) | Closes the Point Cloud Manager. |
| POINTCLOUDSTYLIZE (Command) | Controls coloration of point clouds. |
| POINTCLOUDUNCROP (Command) | Removes cropped areas from point clouds. |
| POINTLIGHT (Command) | Creates a point light emitting in all directions. |
| POLYGON (Command) | Creates an equilateral closed polyline. |
| POLYSOLID (Command) | Creates 3D solid wall-like objects. |
| PRESSPULL (Command) | Dynamically modifies objects by extrusion or offset. |
| PREVIEW (Command) | Displays a plot preview of the drawing. |
| PROJECTGEOMETRY (Command) | Projects geometry onto 3D solids or surfaces. |
| PROPERTIES (Command) | Opens the Properties palette for editing object properties. |
| PROPERTIESCLOSE (Command) | Closes the Properties palette. |
| PROPULATE (Express Tool) | Updates, lists, or clears Drawing Properties data. |
| PSBSCALE (Express Tool) | Sets the scale of block objects relative to paper space. |
| PSETUPIN (Command) | Imports a page setup into a layout. |
| PSOUT (Command) | Creates a PostScript (.PS) file from a drawing. |
| PSPACE (Command) | Switches to paper space in a layout. |
| PSTSCALE (Express Tool) | Sets the scale of text relative to paper space. |
| PTYPE (Command) | Specifies display style and size of point objects. |
| PUBLISH (Command) | Publishes drawings to DWF, DWFx, PDF, or a printer/plotter. |
| PURGE (Command) | Removes unused items (layers, blocks, etc.) from a drawing. |
| PURGEAECDATA (Command) | Removes invisible AEC (Architecture/Civil 3D) data. |
| PUSHTODOCSCLOSE (Command) | Closes the Push to Autodesk Docs palette. |
| PUSHTODOCSOPEN (Command) | Opens the Push to Autodesk Docs palette to upload layouts. |
| PYRAMID (Command) | Creates a 3D solid pyramid. |
Q
| Commande | Description |
|---|---|
| QCCLOSE (Command) | Closes the QuickCalc calculator. |
| QDIM (Command) | Creates a series of dimensions quickly from selected objects. |
| QLATTACH (Express Tool) | Attaches a leader line to an mtext, tolerance, or block reference object. |
| QLATTACHSET (Express Tool) | Globally attaches leader lines to mtext, tolerance, or block reference objects. |
| QLDETACHSET (Express Tool) | Detaches a leader line from an mtext, tolerance, or block reference object. |
| QLEADER (Command) | Creates a leader and leader annotation. |
| QNEW (Command) | Starts a new drawing from a specified drawing template file. |
| QQUIT (Express Tool) | Closes all open drawings and exits AutoCAD. |
| QSAVE (Command) | Saves the current drawing using the default file format. |
| QSELECT (Command) | Creates a selection set based on filtering criteria. |
| QTEXT (Command) | Controls the display and plotting of text and attribute objects. |
| QUICKCALC (Command) | Opens the QuickCalc calculator. |
| QUICKCUI (Command) | Displays the Customize User Interface Editor in a collapsed state. |
| QUICKPROPERTIES (Command) | Displays quick property data for selected objects. |
| QUIT (Command) | Exits the program. |
| QVDRAWING (Command) | Displays open drawings and layouts using preview images. |
| QVDRAWINGCLOSE (Command) | Closes preview images of open drawings and their layouts. |
| QVLAYOUT (Command) | Displays preview images of model space and layouts in the current drawing. |
| QVLAYOUTCLOSE (Command) | Closes preview images of model space and layouts in the current drawing. |
R
| Commande | Description |
|---|---|
| RAY (Command) | Creates a linear object that starts at a point and continues to infinity. |
| RECOVER (Command) | Repairs and then opens a damaged drawing file. |
| RECOVERALL (Command) | Repairs a damaged drawing and all attached xrefs. |
| RECTANG (Command) | Creates a rectangular polyline. |
| REDEFINE (Command) | Restores AutoCAD internal commands overridden by UNDEFINE. |
| REDIR (Express Tool) | Redefines hard-coded paths in xrefs, images, shapes, styles, and rtext. |
| REDIRMODE (Express Tool) | Sets object types to include in the REDIR operation. |
| REDO (Command) | Reverses the effect of the last UNDO or U command. |
| REDRAW (Command) | Refreshes the display in the current viewport. |
| REDRAWALL (Command) | Refreshes the display in all viewports. |
| REFCLOSE (Command) | Saves or discards changes made during in-place editing of a reference. |
| REFEDIT (Command) | Edits an xref or block definition directly within the current drawing. |
| REFSET (Command) | Adds or removes objects from the working set during in-place reference editing. |
| REGEN (Command) | Regenerates the drawing in the current viewport. |
| REGEN3 (Command) | Repairs anomalies in the display of 3D solids and surfaces. |
| REGENALL (Command) | Regenerates the entire drawing in all viewports. |
| REGENAUTO (Command) | Obsolete. Controlled automatic regeneration. |
| REGION (Command) | Converts enclosed objects into a 2D region object. |
| REINIT (Command) | Reinitializes input devices and system parameters. |
| RENAME (Command) | Renames items such as layers, blocks, and styles. |
| RENDER (Command) | Creates a photorealistic or shaded image of a 3D model. |
| RENDERCROP (Command) | Renders a specified rectangular area of a viewport. |
| RENDERENVIRONMENT (Command) | Controls environment-related rendering settings. |
| RENDERENVIRONMENTCLOSE (Command) | Closes the Render Environment & Exposure palette. |
| RENDEREXPOSURE (Command) | Controls rendering exposure settings. |
| RENDEREXPOSURECLOSE (Command) | Closes the Render Environment & Exposure palette. |
| RENDERONLINE (Command) | Uses Autodesk’s cloud services to render a 3D model. |
| RENDERPRESETS (Command) | Specifies reusable rendering parameter presets. |
| RENDERPRESETSCLOSE (Command) | Closes the Render Presets Manager palette. |
| RENDERWIN (Command) | Obsolete. Displays the Render window. |
| RENDERWINDOW (Command) | Displays the Render window without rendering. |
| RENDERWINDOWCLOSE (Command) | Closes the Render window. |
| REPURLS (Express Tool) | Replaces a text string in URLs attached to selected objects. |
| RESETBLOCK (Command) | Resets dynamic block references to default values. |
| RESUME (Command) | Resumes an interrupted script. |
| REVCLOUD (Command) | Creates or edits a revision cloud. |
| REVCLOUDPROPERTIES (Command) | Controls arc chord length in a revision cloud. |
| REVERSE (Command) | Reverses the direction of lines, polylines, splines, or helixes. |
| REVERT (Express Tool) | Closes and reopens the current drawing. |
| REVOLVE (Command) | Creates a 3D solid or surface by revolving an object around an axis. |
| REVSURF (Command) | Creates a mesh surface by revolving a profile. |
| RIBBON (Command) | Displays the ribbon interface. |
| RIBBONCLOSE (Command) | Hides the ribbon interface. |
| ROTATE (Command) | Rotates selected objects around a base point. |
| ROTATE3D (Command) | Rotates objects about a 3D axis. |
| RPREF (Command) | Displays the Render Presets Manager palette. |
| RPREFCLOSE (Command) | Closes the Render Presets Manager palette. |
| RSCRIPT (Command) | Repeats the last run script file. |
| RTEDIT (Express Tool) | Edits existing remote text (rtext) objects. |
| RTEXT (Express Tool) | Creates remote text (rtext) objects. |
| RTUCS (Express Tool) | Dynamically rotates the UCS using your pointing device. |
| RULESURF (Command) | Creates a mesh surface between two curves or lines. |
S
| Commande | Description |
|---|---|
| SAVE (Command) | Saves the current drawing under a different file name or location without changing which drawing is active. |
| SAVEALL (Express Tool) | Saves all open drawings. |
| SAVEAS (Command) | Saves a copy of the current drawing under a new file name or location. |
| SAVEIMG (Command) | Saves a rendered image to a file. |
| SAVETOWEBMOBILE (Command) | Saves a copy of the current drawing to your Autodesk Account. |
| SCALE (Command) | Enlarges or reduces selected objects while maintaining proportions. |
| SCALELISTEDIT (Command) | Controls the list of scales available for viewports, layouts, and plotting. |
| SCALETEXT (Command) | Scales selected text without changing location. |
| SCRIPT (Command) | Executes commands from a script file. |
| SCRIPTCALL (Command) | Executes commands and nested scripts from a script file. |
| SECTION (Command) | Creates a 2D region object from the intersection of a plane with 3D objects. |
| SECTIONPLANE (Command) | Creates a cutting plane through 3D objects and point clouds. |
| SECTIONPLANEJOG (Command) | Adds a jogged segment to a section object. |
| SECTIONPLANESETTINGS (Command) | Sets display options for section planes. |
| SECTIONPLANETOBLOCK (Command) | Converts section planes to 2D or 3D blocks. |
| SECTIONSPINNERS (Command) | Sets increment value for section plane offset and slice controls. |
| SECURITYOPTIONS (Command) | Controls security restrictions for running executable files. |
| SELECT (Command) | Places selected objects in the Previous selection set. |
| SELECTCOUNT (Command) | Adds matching objects in the current count to the selection set. |
| SELECTSIMILAR (Command) | Adds all objects matching selected object properties to selection set. |
| SETBYLAYER (Command) | Changes property overrides to ByLayer. |
| SETVAR (Command) | Lists or changes system variable values. |
| SHADEMODE (Command) | Controls 3D object display mode. |
| SHAPE (Command) | Inserts a shape from a loaded SHX file. |
| SHARE (Command) | Shares a link to the drawing to view/edit online or on mobile. |
| SHAREDVIEWS (Command) | Opens the Shared Views palette. |
| SHAREDVIEWSCLOSE (Command) | Closes the Shared Views palette. |
| SHAREVIEW (Command) | Publishes a view or drawing for online sharing. |
| SHEETSET (Command) | Opens the Sheet Set Manager. |
| SHEETSETHIDE (Command) | Closes the Sheet Set Manager. |
| SHELL (Command) | Accesses operating system commands. |
| SHOWPALETTES (Command) | Restores hidden palettes, ribbon, and tabs. |
| SHOWRENDERGALLERY (Command) | Displays rendered images stored in your Autodesk account. |
| SHOWURLS (Express Tool) | Displays and allows editing of all attached URLs in the drawing. |
| SHP2BLK (Express Tool) | Replaces shapes with equivalent blocks. |
| SIGVALIDATE (Command) | Displays digital signature information for a drawing. |
| SKETCH (Command) | Creates freehand line segments. |
| SLICE (Command) | Slices solids or surfaces into new parts. |
| SNAP (Command) | Restricts cursor movement to specified intervals. |
| SOLDRAW (Command) | Creates profiles and sections in layout viewports. |
| SOLID (Command) | Draws solid-filled triangles or quadrilaterals. |
| SOLIDEDIT (Command) | Edits 3D solid faces and edges. |
| SOLPROF (Command) | Creates 2D profiles of 3D solids in a layout viewport. |
| SOLVIEW (Command) | Automatically creates orthographic views and layout viewports. |
| SPACETRANS (Command) | Calculates equivalent distances between model and paper space. |
| SPELL (Command) | Checks spelling throughout the drawing. |
| SPHERE (Command) | Creates a 3D solid sphere. |
| SPLINE (Command) | Draws a smooth curve through points or with control vertices. |
| SPLINEDIT (Command) | Edits spline parameters or converts splines. |
| SPOTLIGHT (Command) | Creates a directional spotlight. |
| SSX (Express Tool) | Creates a selection set from a selected object. |
| STANDARDS (Command) | Manages drawing standards and associations. |
| STATUS (Command) | Displays drawing statistics and modes. |
| STLOUT (Command) | Exports 3D solids/meshes to stereolithography (.STL) format. |
| STRETCH (Command) | Stretches objects crossed by a selection window/polygon. |
| STYLE (Command) | Creates or modifies text styles. |
| STYLESMANAGER (Command) | Opens the Plot Style Manager. |
| SUBTRACT (Command) | Subtracts one region or solid from another. |
| SUNPROPERTIES (Command) | Opens the Sun Properties palette. |
| SUNPROPERTIESCLOSE (Command) | Closes the Sun Properties palette. |
| SUPERHATCH (Express Tool) | Applies hatch using images, blocks, xrefs, or wipeouts. |
| SURFBLEND (Command) | Creates a blend surface between two existing surfaces. |
| SURFEXTEND (Command) | Extends a surface by a specified distance. |
| SURFEXTRACTCURVE (Command) | Extracts curves from surfaces and solids. |
| SURFFILLET (Command) | Creates a fillet surface between two surfaces. |
| SURFNETWORK (Command) | Creates a surface between curves in U and V directions. |
| SURFOFFSET (Command) | Creates a parallel surface at a set distance. |
| SURFPATCH (Command) | Fills a closed surface edge loop with a new surface. |
| SURFSCULPT (Command) | Creates a solid from trimmed surfaces or meshes. |
| SURFTRIM (Command) | Trims surfaces at their intersections. |
| SURFUNTRIM (Command) | Restores trimmed surface portions. |
| SWEEP (Command) | Sweeps a 2D object along a path to create a 3D object. |
| SYSVARMONITOR (Command) | Monitors system variables for changes. |
| SYSVDLG (Express Tool) | Views, edits, saves, and restores system variables. |
| SYSWINDOWS (Command) | Arranges AutoCAD and external application windows. |
T
| Commande | Description |
|---|---|
| TABLE (Command) | Creates an empty table object. |
| TABLEDIT (Command) | Edits text in a table cell. |
| TABLEEXPORT (Command) | Exports data from a table object in CSV file format. |
| TABLESTYLE (Command) | Creates, modifies, or specifies table styles. |
| TABLET (Command) | Calibrates, configures, and controls a digitizing tablet. |
| TABSURF (Command) | Creates a mesh by sweeping a curve along a straight path. |
| TARGETPOINT (Command) | Creates a target point light. |
| TASKBAR (Command) | Controls AutoCAD’s behavior in the Windows taskbar when multiple drawings are open. |
| TCASE (Express Tool) | Changes the case of selected text, mtext, attributes, and dimension text. |
| TCIRCLE (Express Tool) | Draws a circle, slot, or rectangle around selected text or mtext. |
| TCOUNT (Express Tool) | Adds sequential numbering to text or mtext. |
| TEXT (Command) | Creates a single-line text object. |
| TEXTALIGN (Command) | Aligns multiple text objects in a specified direction. |
| TEXTEDIT (Command) | Edits text in text, mtext, or dimension objects. |
| TEXTFIT (Express Tool) | Stretches or compresses text width between two points. |
| TEXTMASK (Express Tool) | Places a background mask behind selected text or mtext. |
| TEXTSCR (Command) | Opens a text window displaying the command history. |
| TEXTTOFRONT (Command) | Brings text, leaders, and dimensions to the front. |
| TEXTUNMASK (Express Tool) | Removes the background mask from text or mtext. |
| TFRAMES (Express Tool) | Toggles the display of wipeout and image frames. |
| THICKEN (Command) | Converts surfaces into 3D solids with thickness. |
| TIFOUT (Command) | Exports selected objects to a TIFF file. |
| TIME (Command) | Displays creation, edit, and access times for the drawing. |
| TINSERT (Command) | Inserts a block into a table cell. |
| TJUST (Express Tool) | Changes the justification of text without moving it. |
| TOLERANCE (Command) | Adds geometric tolerances in a feature control frame. |
| TOOLBAR (Command) | Displays, hides, or customizes toolbars. |
| TOOLPALETTES (Command) | Opens the Tool Palettes window. |
| TOOLPALETTESCLOSE (Command) | Closes the Tool Palettes window. |
| TORIENT (Express Tool) | Rotates text or blocks for readability. |
| TORUS (Command) | Creates a 3D solid torus (donut shape). |
| TPNAVIGATE (Command) | Displays a specific tool palette or group. |
| TRACE (Command) | Opens and manages traces from the command prompt. |
| TRACEBACK (Command) | Switches active trace to view mode. |
| TRACEEDIT (Command) | Switches active trace to edit mode. |
| TRACEFRONT (Command) | Switches active trace to edit mode and moves it to front. |
| TRACEPALETTECLOSE (Command) | Closes the Trace palette. |
| TRACEPALETTEOPEN (Command) | Opens the Trace palette. |
| TRACEVIEW (Command) | Switches active trace to view mode while keeping it visible. |
| TRANSPARENCY (Command) | Controls image background transparency. |
| TRAYSETTINGS (Command) | Configures status bar tray icon display and alerts. |
| TREESTAT (Command) | Displays info about the spatial index of the drawing. |
| TREX (Express Tool) | Combines TRIM and EXTEND commands in one. |
| TRIM (Command) | Trims objects to meet the edges of other objects. |
| TSCALE (Express Tool) | Scales text and attribute objects. |
| TXT2MTXT (Command) | Converts single-line text to multiline text. |
| TXTEXP (Express Tool) | Explodes text into polylines. |
U
| Commande | Description |
|---|---|
| U (Command) | Reverses the most recent operation. |
| UCS (Command) | Sets the origin and orientation of the current user coordinate system (UCS). |
| UCSICON (Command) | Controls the visibility, placement, appearance, and selectability of the UCS icon. |
| UCSMAN (Command) | Manages UCS definitions. |
| ULAYERS (Command) | Controls the display of layers in a DWF, DWFx, PDF, or DGN underlay. |
| UNDEFINE (Command) | Allows an application-defined command to override an internal command. |
| UNDO (Command) | Reverses the effect of commands. |
| UNGROUP (Command) | Disassociates the objects from a group. |
| UNION (Command) | Combines 3D solids, surfaces, or regions into a single composite object. |
| UNISOLATEOBJECTS (Command) | Displays objects previously hidden using ISOLATEOBJECTS or HIDEOBJECTS. |
| UNITS (Command) | Controls the precision and display format for units of measurement. |
| UPDATEFIELD (Command) | Updates fields in selected objects. |
| UPDATETHUMBSNOW (Command) | Manually updates thumbnail previews for views, drawings, and layouts. |
V
| Commande | Description |
|---|---|
| VBAIDE (Command) | Displays the Visual Basic Editor. |
| VBALOAD (Command) | Loads a global VBA project into the current work session. |
| VBAMAN (Command) | Manages VBA project operations using a dialog box. |
| VBAPREF (Command) | Provides access to some of the VBA environment settings. |
| VBARUN (Command) | Runs a VBA macro. |
| VBASTMT (Command) | Executes a VBA statement at the AutoCAD Command prompt. |
| VBAUNLOAD (Command) | Unloads a global VBA project. |
| VIEW (Command) | Saves and restores named model space, layout, and preset views. |
| VIEWBACK (Command) | Restores sequential views backward after a view change. |
| VIEWBASE (Command) | Creates a base view from model space or Inventor models. |
| VIEWCOMPONENT (Command) | Selects components from a model documentation view for editing. |
| VIEWDETAIL (Command) | Creates a detail view of part of a model documentation drawing. |
| VIEWDETAILSTYLE (Command) | Creates and modifies detail view styles. |
| VIEWEDIT (Command) | Edits an existing model documentation view. |
| VIEWFORWARD (Command) | Restores forward views after using VIEWBACK or Zoom Previous. |
| VIEWGO (Command) | Restores a named view. |
| VIEWPLAY (Command) | Plays the animation associated with a named view. |
| VIEWPLOTDETAILS (Command) | Displays information about completed plot and publish jobs. |
| VIEWPROJ (Command) | Creates projected views from an existing model documentation view. |
| VIEWRES (Command) | Sets tessellation resolution in a viewport when WHIPARC is off. |
| VIEWSECTION (Command) | Creates a section view from a 3D model. |
| VIEWSECTIONSTYLE (Command) | Creates and modifies section view styles. |
| VIEWSETPROJ (Command) | Sets the active project file for Inventor-based documentation views. |
| VIEWSKETCHCLOSE (Command) | Exits the symbol sketch editing mode. |
| VIEWSTD (Command) | Sets default settings for model documentation views. |
| VIEWSYMBOLSKETCH (Command) | Opens sketch mode to constrain section lines or detail boundaries. |
| VIEWUPDATE (Command) | Updates out-of-date drawing views after model changes. |
| VISUALSTYLES (Command) | Creates, modifies, and applies visual styles. |
| VISUALSTYLESCLOSE (Command) | Closes the Visual Styles Manager. |
| VLISP (Command) | Opens the AutoLISP development environment. |
| VPCLIP (Command) | Redefines a layout viewport while keeping its properties. |
| VPLAYER (Command) | Controls layer visibility within specific viewports. |
| VPMAX (Command) | Maximizes the current layout viewport for editing. |
| VPMIN (Command) | Minimizes and restores the current layout viewport. |
| VPOINT (Command) | Sets the 3D viewing direction. |
| VPORTS (Command) | Creates multiple viewports in model space or layout. |
| VPSCALE (Express Tool) | Displays the scale of a selected layout viewport. |
| VPSYNC (Express Tool) | Aligns one or more viewports with a master viewport. |
| VSCURRENT (Command) | Sets the current visual style in the active viewport. |
| VSLIDE (Command) | Displays a slide image file in the viewport. |
| VSSAVE (Command) | Saves the current visual style under a new name. |
| VTOPTIONS (Command) | Enables smooth transition between view changes. |
W
| Commande | Description |
|---|---|
| WALKFLYSETTINGS (Command) | Controls the walk and fly navigation settings. |
| WBLOCK (Command) | Saves selected objects or a block as a separate drawing file. |
| WEBLIGHT (Command) | Creates a 3D light with a specific intensity distribution pattern. |
| WEBLOAD (Command) | Loads and executes JavaScript from a URL. |
| WEDGE (Command) | Creates a 3D solid wedge. |
| WHOHAS (Command) | Displays information about who has a drawing file open. |
| WIPEOUT (Command) | Creates a wipeout object and manages its frame visibility. |
| WMFIN (Command) | Imports a Windows Metafile (WMF) into the drawing. |
| WMFOPTS (Command) | Sets import options for Windows Metafile (WMF) files. |
| WMFOUT (Command) | Exports selected objects to a Windows Metafile (WMF). |
| WORKSPACE (Command) | Creates, modifies, and sets the current workspace. |
| WSSAVE (Command) | Saves the current workspace configuration. |
| WSSETTINGS (Command) | Sets preferences and options for workspace behavior. |
X
| Commande | Description |
|---|---|
| XATTACH (Command) | Attaches selected DWG files as external references (xrefs). |
| XBIND (Command) | Binds one or more definitions of named objects in an xref to the current drawing. |
| XCLIP (Command) | Crops the display of a selected external reference or block to a specified boundary. |
| XCOMPARE (Command) | Compares an attached xref with its latest version and highlights differences with revision clouds. |
| XCOMPARECLOSE (Command) | Closes the Xref Compare toolbar and ends the comparison. |
| XCOMPARERCNEXT (Command) | Zooms to the next difference found in the xref comparison. |
| XCOMPARERCPREV (Command) | Zooms to the previous difference found in the xref comparison. |
| XDATA (Express Tool) | Attaches extended object data (xdata) to a selected object. |
| XDLIST (Express Tool) | Lists the xdata attached to a selected object. |
| XEDGES (Command) | Creates wireframe geometry from the edges of 3D solids, surfaces, meshes, or regions. |
| XLINE (Command) | Creates an infinite construction line. |
| XLIST (Express Tool) | Lists type, block name, layer, color, and linetype of a nested object in a block or xref. |
| XOPEN (Command) | Opens the selected xref in a new drawing window. |
| XPLODE (Command) | Explodes a compound object into its components with specified properties. |
| XREF (Command) | Opens the External References palette to manage attached xrefs. |
Y
Z
| Commande | Description |
|---|---|
| ZOOM (Command) | Increases or decreases the magnification of the view in the current viewport. |
